A paper cutter blade usually has two sides a flat one and a slanting one. You need to know the angle your blade is to be sharpened by.
To sharpen the blade on a paper cutter paper trimmer the blade cannot be sharpened on the paper cutter it must be removed.
How to sharpen a paper cutter board blade.
Either sharpen the flat beveled or slating side.
Your cutters blade is much like a knife except for its.
Sharpen only the beveled or rather the slanting side.
How to sharpen a paper cutter blade honing vs.
If youre not sure how to disassemble the cutter and remove the blade check what the cutters user manual says or call the manufacturer if you still cant pull it off.
Dont sharpen both the sides.
In order to re sharpen the blade i must first remove the blade from the structure of the paper cutter.
Often this requires using an allen wrench to remove the bolts along the mount of the cutter.
There are two sides in a cutter blade beveled and slating side.
You need to identify the cutting edge of the blade which is cut at an angle.
Doing so means lowering the blade and stopping it in the down.
To sharpen the blade you need to remove it from its mount.
First you need to separate the blade from the cutter by losing the arm fastening nut from the body.
The first thing you need to know is that your cutter may not need sharpening.
Holding the blade at a correct angle is the key to successfully sharpening the blade.
How to sharpen a paper cutter follow this 3 easy step.
Sharpening on a stone.
Place the blade on the sharping stone.
No comments:
Post a Comment