Multiply the answer by your water hardness in grains per gallon to convert mgl or ppm to grains divide by 171. If iron is present.
Water softener capacity calculation ideally a water softener should be sized so that it does not regenerate any more often that every three days wastes water and salt nor go longer than 14 days before regenerating can cause compacting of resin and fouling with sediment or iron.
How to set water softener capacity.
Multiply the number of people in your family times 70 gallons of water used per day national average.
As you lower the salt setting the force decreases and starts to let more hard minerals pass though the softener.
Softeners are usually assumed to be set at 15 lbs per cubic foot ft3.
Getting your water softener setting adjusted to its optimal performance is a relatively simple procedure.
Convert water hardness from ppm to grains per us gallon.
At that setting your softener will deliver the softest water 1 ppm.
You will need to do some water testing with a hardness indicator and taste testing for salt content.
Set the water softener capacity.
Calculate softener capacity in grains.
Water softener control adjustment procedure details 6 easy steps to soft water measure the hardness of your water using a test kit or by asking a service tech to do it for you.
The softener capacity is calculated in three simple steps.
Unfortunately simple does not mean quick and easy and it will be a time consuming operation.
Use the following formula to calculate the proper size.
Calculate softener capacity in gallons.
Adjust the water softener hardness setting.
Adjust the water softener capacity.
As you lower the salt setting the amount of hardness that can pass though the softener will be higher 2 3 grains but the amount of gallons water you can run through per pound of salt used to regenerate the softener will increase.
No comments:
Post a Comment