Now baste the patch from the outside of the shirt. Stitch 6mm 13 inch in from the seam.
Before sewing over the hole trim away some.
How to sew a hole step by step.
Starting anywhere on the square make a 14 inch stitch down through the patch.
Fold the thread in half with the needle at the center and tie a knot at the other end.
Once on the front side that the needle through the back and to the front so that it comes out level to the first stitch.
Make your initial cut with a exacto knife.
Method 1 sewing a small hole 1.
Use thread that closely matches the color of your denim.
Making the slide the same size as the diameter of your button.
Method 3 reinforcing a hole.
Now open the top fold and insert the needle so that it comes out the front side.
Trim away the frayed edges.
Place the plain fabric on top of the piping and patterned fabric.
Crisscross a few times until the hole is securely closed then knot the thread very close to the fabric and snip with a scissor leaving 116 of an inch of extra thread above the knot.
Cut both strands of the thread at the 18 inches 46 cm mark.
How to sew a four hole button steps unwind 2 feet 24 in.
Use small over stitching to make the seam finished up with a witchs stitch knot.
Get a thread roll and a needle.
I burned a hole in my down jacket and i have watched tons of videos on youtube none of them can explain how to repair a down jacket very well step by step so i decided to make a video.
Push the needle up and out catching the folded edge of the hole.
Tie a knot in the thread.
Your knot will look like this when it is tied.
How to sew up holes method 1 choosing the needle and thread.
Fold a piece of fabric in half and pin it in place.
Stitch a row of machine stitches around the edges to keep the piping in place.
Insert the needle.
Method 2 sewing a split seam.
If the hole is too big youll need some cloth.
Thread your needle by moistening the tip of the thread and feeding it through the eye of the needle.
Continue all around the hole and remove pins.
Continue sewing along one side of the pillows open edge.
Whip stitch is much easier.
Identify a split seam.
Method 4 patching a hole.
Starting at the top of one side of the incision and working your way to the bottom and back up the opposite side of hole to make your button hole seam.
Insert the needle at one edge then go under and across to the other side of the hole.
Try using an iron on patch for.
No comments:
Post a Comment